Pull handles

Please select a subcategory

Pull Handles, Stainless Steel

Pull Handles, Leather/Wood Application

Guidance & helpful documents

Brochure 05 Pull Handles and Flush Handles

Our recommendations in this category

Level, pull handle [/] 30/8mm

different drilling distances and applications

Details

Beluga, pull handle ø 20mm

different drilling distances and applications

Details

All products in this category

Buy pull handles in many variants directly from ABP-Beyerle

Pull handles on doors are an alternative to the usual door handles and lever handles. They are a highlight and of great benefit on house entrance doors as well as in offices and public buildings. With pull handles from ABP-Beyerle, every entrance door and sliding door is equipped with the right handles.

Especially when push handles are used in buildings where there is a lot of public traffic and the doors are opened and closed with high frequency, you should not only pay attention to the design of the handle when selecting it, but especially to quality and stable fastenings.

Pull handles on entrance doors are usually used with a separate lock and key and are used to push or pull the door open. In addition, the entrance door is a first business card that is shown to visitors and should therefore be designed in an inviting way.

Normally, pull handles are used whenever it is assumed that the door should be opened and closed quickly and effortlessly without having to pay attention to locking mechanisms or other mechanics. Due to the simple handling and installation, this is an uncomplicated way to operate doors in public facilities and also offices.

Indoors, they are an alternative to flush pulls from an aesthetic point of view, especially in combination with sliding doors. Especially with double-leaf sliding doors, where it requires strength to open and close the door, pull handles are a robust yet luxurious choice.

Door handles for opening and closing the front door always catch the eye first when entering a building and leave the first impression in terms of aesthetics and design of a door. With the right choice of door handle, you can set accents - classic, curved, straight or angular.

There are no limits to the variety - buy pull handles directly from the manufacturer

Our wide range of pull handles includes straight, curved and angular door handles made of stainless steel. In addition, we stock pull handles with leather and wood applications and, with the modular system of SCI, Beluga Vario and Maxi handles, we offer you the option of ordering pull handles with individual handle lengths.

Straight door handles are also called bar handles due to the straight handle bar and belong to the timeless and also most popular push handles. The handle bar is attached to the door leaf with two straight or angled spacers and ensures stability.

One of the classics is the Impero door handle, which is not only available in different lengths but also in different handle bar diameters and also scores with end caps welded and chamfered onto the bar.

Pull handles in combination with leather and wood

Modern, natural materials such as leather and wood in combination with a high-quality bar handle made of satin stainless steel or polished stainless steel enhance every entrance door and make it a real eye-catcher.

Bar handles with leather

Leather gives a handle a particularly elegant look as well as a pleasant feel. We use high-quality, particularly hard-wearing leather and offer two leather classes:

Blank leather Classic: Blank leather Classic is a purely vegetable-tanned leather with a slightly waxy feel. Selected fatliquors make the leather even more hard-wearing. Slight scratches and scarring are natural.

Classic Nappa: Classic Nappa cowhide is a drum-dyed full-grain leather. An elegant finish makes the leather easy-care and dirt-repellent. The typical leather character and a warm, soft feel distinguish this leather.

Bar handles with wood

In combination with wood, bar handles made of solid stainless steel look very elegant and make them appear less bulky. You can choose between the wood types teak, walnut and wenge. We only use untreated wood and therefore recommend oiling, waxing or lacquering the wooden part.

Please note that our self-produced pull handles in combination with leather and wood are not in stock in all versions and are made to order.

Material

All our pull door handles are made of satin stainless steel, which also prevents premature rusting. This is particularly important for entrance door fittings that are exposed to the weather. On the Impero, Initio, Isala, Syx and SCI modular system models, the handle supports are made of solid stainless steel (1.4305).

To which door can I attach the pull handles?

You can attach all our pull handles to glass doors with a door leaf thickness of 8-13mm. You also have the option of fitting the door handles to wooden/plastic and aluminium doors. Depending on the thickness of the door leaf, we have different mounting sets in our range. The mounting sets must therefore be ordered separately.

What installation variants are available?

Glass doors

On glass doors you can mount the single handle visible on one side only, a pair of handles is mounted in pairs on a glass door.

Wood/plastic/aluminium doors

To attach a single handle to one of these door leaves, note the door leaf thickness of your door when selecting the mounting set and choose between fixing the door handle visible on one side or invisible on one side.

Depending on the door handle series, an M6 cutting sleeve or an M8 cutting sleeve is supplied for fastening to plastic or aluminium doors. For invisible fixing to wooden doors on one side, an M6 ramp sleeve (for door leaf thickness > 19mm) or M8 ramp sleeve (for door leaf thickness > 35mm) is supplied in the fixing set.

You can find a complete overview of the fixing sets here: Fixing sets for pull handles

Can I replace pull handles at any time?

To give the entrance door a new look or to add new flair, pull handles can be replaced. Change the style of your door as you wish, but note that the drilling dimension of the new handle must match the drilling dimension of the old handle, so you don't have unsightly holes in the door, you don't have to re-drill and the replacement of the handle works without any problems. Also make sure that you choose the right fixing set.