Corner fitting for glass doors
Patch fitting Pendula
Characteristics:For outdoor and indoor use
hydraulic fitting
No tillage
For existing construction
surface: stainless steel, finely ground (1.4301)Advantages:
Glass thickness: 8 -13 mm
Door weight max: 100 kg
Door width max: 1000 mm
Fixed: 90°
Adjustability: +/-3mm
Adjustability: +/-3°
2-stage closing speed
Closing force EN4
Test 500,000 cycles according to DIN 1154
Patch fitting Small Pendula
Characteristics:
For indoor use
hydraulic fitting
No tillage
For existing constructionAdvantages:
Glass thickness: 8 / 10 / 12 mm
Door weight max: 100 kg
Door width max: 900 mm
Fixed: 90°
Adjustability base plate: +/-4 mm
Adjustability: +/-3°
Closing speed adjustable
Test 500,000 cycles according to DIN 1154
Closing force EN2
Surface: stainless steel, finely ground (1.4301)
Swing door fitting with pull handle
for glass door thickness 8 - 13.52mmmax. glass door weight 100kgstainless steel finishconsists of: swing door fitting (hydraulic bottom hinge and top hinge and plate with top pivot) and pair of Impero pull handle (drilling dimension 210mm and length 300mm)
Swing door fitting from ABP-Beyerle
Our swing door fittings for glass doors can be used both indoors and outdoors. We offer various models that differ in size and area of application.
Which fitting is suitable for my installation situation?
The swing door fitting Pendula is recommended for glass thicknesses from 8mm to 13.52mm. In contrast to comparable corner fittings, this is designed for a maximum door weight of 100 kg and is particularly suitable for outdoor use. Gusts of wind, for example, cannot push the door open. When planning, you should ensure that your door opening is no wider than 100 cm.
If you prefer a smaller, simpler swing door fitting for glass doors, we recommend the variant Small Pendula. This door fitting with hydraulic technology is suitable for indoor use as it requires little force to open the door. You can lock it in the 90º position as required and regulate the closing speed as desired. The closing speed determines the closing time.
Both versions are made of fine-ground stainless steel (1.4301).
What are the advantages of our swing door fittings?
no floor cultivation necessary
An additional floor door closer is not necessary and the floor does not have to be worked before installation.
retrofitting possible
You can also retrofit the glass door fittings in existing wall openings. Floor recesses, as with door closers, are not necessary as all the technology is already housed in the fitting.
tested
The swing door fittings have all been tested with 500,000 cycles according to the DIN EN:1154 standard.
adjustable and adjustable
Furthermore, they are adjustable in three ways:
- lateral adjustability of the glass door of +/- 3 mm
- 3º adjustability of the fixing plate
- 5º adjustment of the zero point
adjustable closing force
To achieve a comfortable and safe closing of the door, the closing force of the door closer can be adjusted to the door situation and size. Depending on the installation situation, higher closing forces may be required. The door closing force is regulated by DIN EN:1154:
Closing force size | recommended door leaf width mm, max. |
---|---|
1 | 750 |
2 | 850 |
3 | 950 |
4 | 1100 |
5 | 1250 |
6 | 1400 |
7 | 1600 |
What do I have to bear in mind during installation?
The installation of the corner fittings is child's play and quick and therefore suitable for hotel rooms and offices where the installation must be carried out quickly and the doors are opened and closed very frequently, but also in the private sector. The glass door is clamped into the floor and ceiling fitting.
Recommendation
Due to the hydraulic technology, you may experience a slight noise after the first installation. This can be stopped by opening and closing the door several times.
What other door fittings are available from ABP-Beyerle?
If your installation situation does not allow you to install a revolving door, you will also find the following in our diverse programme Sliding doors for glass doors and wooden doors as a space-saving variant, Aluminium fittings and Floor roller fittings - ideal for walls with insufficient load-bearing capacity.