Nexus Movable Wall System

Please select a subcategory

Columns and swivel combination

Floor panels

Decorative elements

Glass clamps

Clamp fittings

Duetec connector

All products in this category

Glass clamp square tube

Glass thickness: 10mm | Type of Glass: single-pane safety glass ESG

Glass thickness 10mmglass type: toughened safety glasswith safety pin, glass protection sleeve and rubber insertsStainless steel (V4A) fine grindingGlass hole for safety pin ø 10mm + 0,3mm

€21.55*

Glass clamp round tube D 38-42mm

Glass thickness: 10mm | Type of Glass: single-pane safety glass ESG

Glass thickness 10mmGlass type: ESGconnection ø 38-42mmwith safety pin, glass protection sleeve and rubber insertsStainless steel (V4A) fine grindingGlass hole for safety pin ø 10mm + 0,3mmcan be used for Nexus column ø 40/50mm

€22.16*

Nexus pillar, tube D 40mm

Application: Center Pillar 180° | Length: 1600mm

tube ø 40mm length 1600mm, ø 40mm, Type: center pillar 180°, M8: 2x2 caped tube with pairwise M8 internal thread to mount the fittings satin stainless steel-Tube (AISI 304)

Variants from €97.58*

€114.24*

Bottom plate with cover plate tube D 40mm

ø 125mm, d (tube) ø 40mmplate with 2 drills ø 8,5mm for floor mounting (coated steel)cover plate: satin stainless steel (AISI 304)

€64.26*

Cap cone top for pillar, D 40mm

satin stainless steel (AISI 303)ø 40mmlength 15mmdiameter ø 15mmM8height 40mm

€33.32*

Glass clamp round tube D 38-42mm

Glass thickness: 10,76mm | Type of Glass: laminated safety glass VSG

Glass thickness 10.76mmGlass type: VSGConnection: ø 38-42mmwith safety pin, glass protection sleeve and rubber insertsStainless steel (V4A) fine grindingGlass hole for safety pin ø 10 mm + 0.3 mm

€24.94*

Nexus Duetec angle connector exterior view

different tube diameters, types of use and connections

from €128.52*

View all Items

Nexus pillar, tube D 50mm

Application: Corner Pillar 90° | Length: 1400mm

tube ø 50mm length 1400mm, ø 50mm, type: end pillar 90º, M8: 2x2 caped tube with pairwised M8 internal thread to mount the fittings satin stainless steel-Tube (AISI 304)

Variants from €121.38*

€126.14*

Glass clamp square tube

Glass thickness: 8,76mm | Type of Glass: laminated safety glass VSG

Glass thickness 8.76mmGlass type: VSGwith safety pin, glass protection sleeve and rubber insertsStainless steel (V4A) fine grindingGlass hole for safety pin ø 10mm + 0,3mm

€24.29*

Cap bowl for pillar, D 40mm

satin stainless steel (AISI 303)length 15mmdiameter ø 15mmM8

€28.56*

Bottom plate, round grind, D 300mm

bottom plate for pillars ø 40/50mmø 300mm, thickness 5mm3 drillings for M8 countersunk screws (pitch circle 220mm) for floor mountingsatin stainless steel (AISI 304)

€157.08*

Clamp for sheets/plates

for sheet thickness and plate thickness up to 3mmwith M8 attachment for pillarssatin stainless steel (AISI 303)

€15.57*

Nexus Duetec angle connector interior view

different tube diameters, types of use and connections

from €122.57*

View all Items

Nexus in-line moveable pillar, tube D 50mm

Length: 1400mm

tube ø 50mm with fixed glass clamps length 1400mm, ø 50mm, Min° 65º caped tube for glass thickness 8/10mm and 8,76/10,76mm include security pin satin stainless steel (AISI 304)

€498.61*

Bottom plate, round grind

Diameter: 150mm | Product Type/Version: round grinded

bottom plate for pillars ø 40/50mm ø 150mm, depth 5mm 3 drillings for M8 countersunk screws (pitch circle 220 mm) for floor mounting satin stainless steel (AISI 304)

Variants from €54.74*

€84.49*

Glass clamp round tube D 48-52mm

Glass thickness: 10,76mm | Type of Glass: laminated safety glass VSG

Glass thickness 10.76mmGlass type: VSGconnection ø 48-52mmwith safety pin, glass protection sleeve and rubber insertsStainless steel (V4A) fine grindingGlass hole for safety pin ø 10mm + 0,3mmcan be used for Nexus column ø 40/50mm

€22.16*

Nexus moveable pillars, tube D 40mm

Application: Center Pillar 180° | Length: 1600mm

tube ø 40mm length 1600mm, ø 40mm, Typ: Center pillar, M8: 2x2 2 caped tubes connected with hinges, 2X2 M8 internal thread to mount the fittings Moveable pillar +/- 90° swinging satin satin stainless steel (AISI 304)

€404.60*

Bottom plate with cover plate tube D 50mm

ø 125mm, d (tube) ø 50mm2 drilling holes ø 8,5mm for floor mounting (steel coated)cover: stainless steel (1.4301), round grinded

€64.26*

Nexus in-line moveable pillar, tube D 40mm

Length: 1400mm

tube ø 40mm with fixed glass clamps length 1400mm, ø 40mm, Min° 80º caped tube for glass thickness 8/10mm and 8,76/10,76mm include security pins satin stainless steel (AISI 304)

€464.10*

Cap cone tops for pillar, D 50mm

satin stainless steel (AISI 303)ø 50mmlength 15mmdiameter ø 15mm M8height 50mm

€38.08*

Clamp for sheets/plates

for sheet thickness and plate thickness to 6mmfor tube ø 40mm with M8 attachmentfor pillarssatin stainless steel (AISI 304)

€24.26*

Glass clamp square tube

Glass thickness: 6,76mm | Type of Glass: laminated safety glass VSG

Glass thickness 6.76mmGlass type: VSGwith rubber inserts for glass thickness GSStainless steel (V4A) fine grinding

Variants from €19.36*

€20.18*

Nexus moveable pillars, tube [/] 20/30mm

2 caped tubes connected with hinges moveable pillar +/- 90° swinging 2x2 M8 internal thread to mount the fittings satin satin stainless steel (AISI 304)

€445.06*

Cap bowl for pillar, D 50mm

satin stainless steel (AISI 303)length 15mmdiameter ø 15mmM8

€34.51*

Nexus movable wall systems

Much more than just a room divider

In order to present products, pictures and information properly at trade fairs, galleries or museums, you need to stage them correctly. This can be achieved with the Nexus movable wall system from ABP-Beyerle. This system is not only a cost-effective way of placing your products in the best possible way, but also stands out for its high-quality design, flexible application options and outstanding functionality.

Thanks to the excellent variability of our partition wall systems, this is not just a simple, boring room divider, but a flexible companion for the most diverse room situations and furnishing concepts.

But the Nexus movable wall system is not only suitable for exhibitions. The system partitions from the manufacturer ABP-Beyerle are also an optimal and space-saving solution for partitions in offices, libraries or waiting rooms.

The Nexus movable wall system is also an expandable system made of stainless steel. Design-oriented room planning, whether with glass surfaces, metal panels or wooden boards, can be individually realised thanks to the diverse functions. In this way, you can set accents in room design with this movable wall system.

The paired M8 internal threads of the Nexus standing columns make it possible to accommodate mounting fittings such as glass clamps, Nexus clamp fittings or Nexus-Duetec connectors. The columns are available in 2 cross-sections ø 40 mm and ø 50 mm and in 2 standard heights 1400mm and 1600mm. All other dimensions are available on request.

Nexus glass clamps

The stainless steel clamps are designed for use with smooth glass (ESG/VSG). Depending on the intended use, glass weight, coated or uneven glass, the locking pin must be inserted into the clamp fitting (diagonal only). Please be sure to observe the installation instructions! Stainless steel grade V4A can be used outdoors and for swimming pools. Glass clamps in polished stainless steel (V4A) or in fine-ground stainless steel (V2A) for objects can also be requested separately.

For your plans up to 10 mm glass thickness, you will need Nexus standing columns, which must be fitted with glass clamps GK 50/51. For freely selectable angles, use the swivelling pedestal (DE270/275 or 280/285). For possible wall connections, the GK60 glass clamp can be used together with the Tara mounting plate. Matching base plates and decorative elements additionally round off your room design.

Nexus clamp fittings

The series of cylindrical and angular clamp fittings has a simple and restrained look. The glass and mirror holders have an important and serving function for fastening glass shelves, information boards and mirror plates.

For your plans with sheets up to 6 mm thick or wooden panels from 19 mm thick, use the Nexus uprights in conjunction with the Nexus swivel combination (DE250/260). Choose the Nexus clamp fittings to match. For possible wall connections, Tara fastening can be connected with the clamp fittings. Matching floor panels and decorative elements round off your room design.

Nexus Duetec connectors

For glass or board materials from 6mm to 10mm thick, use the Nexus uprights in conjunction with the Nexus Duetec connectors. The defined inner and outer angles for the ø40 mm and ø 50 mm columns offer you great design freedom. When planning the room and the wall development, please pay attention to which side the bar run is on (e.g. inside, side facing away from the customer). Matching floor panels and decorative elements round off your room design.