Corner Fittings for Glass Doors

Patch fitting Pendula

Characteristics:For outdoor and indoor use hydraulic fitting No tillage For existing construction surface: stainless steel, finely ground (1.4301)Advantages: Glass thickness: 8 -13 mm Door weight max: 100 kg Door width max: 1000 mm Fixed: 90° Adjustability: +/-3mm Adjustability: +/-3° 2-stage closing speed Closing force EN4 Test 500,000 cycles according to DIN 1154

Product number: 130.00167

€332.01*

Patch fitting Small Pendula

Characteristics: For indoor use hydraulic fitting No tillage For existing constructionAdvantages: Glass thickness: 8 / 10 / 12 mm Door weight max: 100 kg Door width max: 900 mm Fixed: 90° Adjustability base plate: +/-4 mm Adjustability: +/-3° Closing speed adjustable Test 500,000 cycles according to DIN 1154 Closing force EN2 Surface: stainless steel, finely ground (1.4301)

Product number: 130.00168

€473.62*

Swing door fitting with pull handle

for glass door thickness 8 - 13.52mmmax. glass door weight 100kgstainless steel finishconsists of: swing door fitting (hydraulic bottom hinge and top hinge and plate with top pivot) and pair of Impero pull handle (drilling dimension 210mm and length 300mm)

Product number: 120.00058

€473.62*

Swing door hardware from ABP-Beyerle

Our swing door fittings for glass doors can be used both indoors and outdoors. We offer various models that differ in terms of size and area of application.

Which fitting is suitable for my installation situation?

We recommend the Pendula swing door fitting for glass thicknesses of 8 mm to 13.52 mm. In contrast to comparable corner fittings, it is designed for a maximum door weight of 100 kg and is particularly suitable for outdoor use. Gusts of wind, for example, cannot push the door open. When planning, you should ensure that your door opening is no wider than 100 cm.

If you prefer a smaller, simpler swing door fitting for glass doors, we recommend the Small Pendula variant. This door fitting with hydraulic technology is suitable for indoor use as it requires little force to open the door. You can lock it in the 90º position as required and adjust the closing speed as required. The closing speed determines the closing time.

Both variants are made of fine-ground stainless steel (1.4301).

What are the advantages of our swing door fittings?

No floor preparation necessary

An additional floor spring is not required and the floor does not need to be prepared before installation.

Subsequent installation possible

You can also retrofit the glass door fittings in existing wall openings, whereby floor recesses as with door closers are not necessary as the entire technology is already housed in the fitting.

tested

The swing door fittings have all been tested to 500,000 cycles in accordance with the DIN EN:1154 standard.

Adjustable and adjustable

They are also adjustable in three ways:

Lateral adjustability of the glass door of +/- 3 mm
3º adjustability of the fixing plate
Alignment of the zero point by 5º

Adjustable closing force

To achieve convenient and secure closing of the door, the closing force of the door closer can be adapted to the door situation and size. Depending on the installation situation, higher closing forces may be required. The door closing force is regulated by DIN EN:1154:

Closing force size	recommended door leaf width mm, max.
1	750
2	850
3	950
4	1100
5	1250
6	1400
7	1600

What needs to be considered during installation?

The corner fittings are quick and easy to install, making them suitable for hotel rooms and offices where installation has to be quick and the doors are opened and closed very frequently, as well as in private homes. The glass door is clamped into the floor and ceiling fitting.

Recommendation

Due to the hydraulic technology, you may hear a slight noise after the first installation. This can be cancelled out by opening and closing the door several times. What other door fittings are available from ABP-Beyerle? If your installation situation does not allow you to install a hinged door, you will also find sliding doors for glass doors and wooden doors as a space-saving variant, aluminium fittings and floor roller fittings in our diverse range - ideal for walls with insufficient load-bearing capacity.

What other door fittings are available from ABP-Beyerle?

If your installation situation does not allow you to install a hinged door, you will also find sliding doors for glass doors and wooden doors as a space-saving variant, aluminium fittings and floor roller fittings in our diverse range - ideal for walls with insufficient load-bearing capacity.